Entries by Chris Myton

Concrete pool building standards

When laying the base of a swimming pool the pool company must use steel reinforced concrete to ensure it is strong enough to withstand any movement once the pool is finished. The base should be cast in one layer of concrete with the reinforcing grill mid way through the cement. It should not be cast […]

Ensure pipework is protected

When building a pool it is very important to ensure that all pipework is properly protected from damage once the surrounding earth is replaced. Over the years, as the ground settles, unprotected pipes can easily become damaged. If your pool company takes a short cut then the repairs to broken pipes around your pool can […]

Winterising your pool filtration system

​If you have a property in the Martina Franca area and are being charged €500 to winterise you pools filtration system then please call us. This service should be done as part of your pool closing process and costs your pool company nothing at all apart from half an hours work. It is a very […]

Cyanuric acid

Cyanuric acid is a chemical that is added to dichlor and trichlor pool products to help stabalise the chlorine in outdoor swimming pools. Cyanuric acid forms a weak bond with free chlorine in the pool water, protecting it from the sun’s ultraviolet rays to reduce chlorine loss. If levels of cyanuric are too low then the […]

Chloromines

A clean, clear, correctly balanced, healthy pool should not smell in the slightest of chlorine. If there is a strong chlorine smell coming from the pool then it is an indication that something is not as it should be. It isn’t however what most people believe the problem to be. It isn’t because the level […]

Prevention is better than cure – how to guarantee a perfect pool

It’s good practice to check your pool on a regular basis throughout the winter. At Puglia Pools we visit all our clients pools every three or four weeks (and after heavy storms) to ensure the cover is still in place, water bags are full, pool level is not too high and to test the water […]

Total Hardness

Total hardness is one of the water parameters that you need to check regularly to ensure you keep you pool in perfect condition. Total hardness is the measure of dissolved minerals such as magnesium, Sodium and Calcium in the water and is also known as Calcium hardness when referring to pools. High levels of Calcium […]

Swimming pool lighting

In general pool lamps are very simple to replace when they blow and the pool water level does not need to lowered. The light units are attached to the housing in the pool wall by a length of cable that allows the unit to be lifted out of the water and placed on the side […]

ISOBLOK pool construction

The ISOBLOK pool system is a type of polystyrene block that is designed for quick and simple pool construction. There are several advantages in using these rather than concrete blocks or cast concrete structures. The blocks are light and therefore quicker and easier to transport and install. The isothermic properties provides two layers of insulation […]

The importance of PH

​Maintaining the correct level of PH in your pool is very important as it directly affects the ability of chlorine to sanitise the pool water. When chlorine products are added to water they react with it to produce two different compounds. One of these compounds is very efficient at killing bacteria while the second is […]